Machine transporter 4.8m x 1.8m – 3x1350kg

The Machine transporter 4.8m x 1.8m - 3x1350kg is ideal for transporting your excavators and other vehicles. The Machine transporter 4.8m x 1.8m - 3x1350kg is the longest trailer in its series. With the total measurements of 662 x 240 x 167cm, this is the largest machine transporter we sell. With a payload capacity of 2630 kg, you can easily transport all your vehicles from point A to B. Also, with three 1350 kg axles, you are limited to a total mass of 3500 kg in Europe.

2630 kg Capacity
Number of axes 3 x 1350 kg
662 x 240 x 167 Measurements
870 kg Own weight

Competitive price

Because Vlemmix Trailers buys in large numbers, we can offer competitive prices for all trailers on the market. This means that we can always help our customers with an affordable Vlemmix tiny house trailer.

Payload

The trailer has three axles of 1350kg each, giving you a very high technical payload, but according to European regulations the maximum permissible weight is always 3500kg.

Accuracy

Because each tube or sheet metal part is manufactured with the most modern techniques in sheet metal and tube laser cutting, all parts are accurate to within 0.1 mm.

Machine transporter 4.8m x 1.8m – 3x1350kg

The machine transporter 4.8m x 1.8m – 3x1350kg from Vlemmix Trailers is one of the strongest machine transporters in its class. This machine transporter is the longest trailer in its series, but with a width of 240cm, it is not wider than the 4m x 1.8m trailer. As a result, you don’t need to pay extra attention to the width while driving. With a loading area of ​​480×180 cm, this machine transporter is perfect for a wide machine and accessories. With a load capacity of no less than 2630 kg, the machine transporter is the perfect trailer for transporting mini diggers, aerial platforms or forklift trucks.

Knott’s three 1350kg axles guarantee you high-quality axles under your machine trailer. Knott’s axles are known as extremely reliable axles and are therefore also the market leader in Europe. By mounting the axles as low as possible, Vlemmix Trailers realizes a machine trailer with a low loading floor height of no less than 34 cm.

To further optimize the machine transporter, all chassis of Vlemmix Trailers are hot-dip galvanized. The galvanizing creates a protective layer, which protects the metal against corrosion. This guarantees a high resistance to wear and tear and prevents rust from forming in the event of scratches and minor damage. In addition to the strong and reliable construction, all Vlemmix Trailers machine transporters are also properly finished. For example, all sharp parts such as zinc and metal points are properly finished and the cables of the lighting are concealed in the support beams and ramp of the chassis.

All ramps from Vlemmix Trailers have a gas spring. Folding and unfolding the ramp has never been so easy and safe by means of the gas spring. The ramp also has a sturdy anti-slip profile, so that your machine can easily drive onto the trailer without slipping.

If you are interested in our machine transporter 4.8m x 1.8m – 3x1350kg, but are you missing some extra options? That is no problem! All machine transporters may be additionally available with:

  • Aluminum tread plate 400×180;
  • Cover lock + discus lock;
  • SCM approved lock;
  • Shock absorbers;
  • Tool box 60x27x35 cm;
  • Wheel + tire 195/50R13 900 KG;
  • Floor ring mounted;
  • Winch 1200KG;
  • Winch support;

Find your trailer

Below you can search for your own trailer of choice. You can switch all filters on and off, in order to arrive at your desired trailer!

Europa dots

Get in touch with us

Would you like to know more about our trailer, would you like to make an appointment or do you just have a question? Send us a message or leave your phone number and we'll call you back as soon as possible!

  • By using the contact form you agree to the processing of your personal data according to our privacy declaration.
contact